Displaying The Device Management Configuration; Remote Switch App Upgrade Configuration Example - H3C S5600 Series Operation Manual

Operation Manual – System Maintenance and Debugging
H3C S5600 Series Ethernet Switches

4.3 Displaying the Device Management Configuration

Display the APP to be adopted
at next startup
Display the module type and
operating status of each board
Display CPU usage of a
switch
Display the switch operating
ambient
Display the operating status of
the fan
Display memory usage of a
switch
Display the operating status of
the power supply
Display system diagnostic
information or save system
diagnostic information to a file
with the extension .diag into
the Flash memory
Display enabled debugging on
a specified switch or all
switches in the fabric
Display enabled debugging on
all switches in the fabric by
modules
Display patch state
information

4.4 Remote Switch APP Upgrade Configuration Example

I. Network requirements
Telnet to the switch from a PC remotely and download applications from the FTP server
to the Flash memory of the switch. Update the switch software by using the device
management commands through CLI.
The switch acts as the FTP client, and the remote PC serves as both the configuration
PC and the FTP server.
Perform the following configuration on the FTP server.
To do... Use the command...
display boot-loader [ unit
unit-id ]
display device [ manuinfo
[ unit unit-id ] | unit unit-id ]
display cpu [ unit unit-id ]
display environment
display fan [ unit unit-id
[ fan-id ] ]
display memory [ unit unit-id |
limit ]
display power [ unit unit-id
[ power-id ] ]
display
diagnostic-information
display debugging { fabric |
unit unit-id } [ interface
interface-type
interface-number ]
[ module-name ]
display debugging fabric
by-module
display patch-information
4-8
Chapter 4 Device Management
Remarks
Available in any
view.