Operation Manual – Multicast
H3C S5600 Series Ethernet Switches
Chapter 2 Common Multicast Configuration
Note:
In this manual, the term "router" refers to a router in the generic sense or a Layer 3
Ethernet switch running an IP multicast protocol.
2.1 Common Multicast Configuration
Table 2-1 Complete the following tasks to perform common multicast configurations:
Enabling Multicast Packet Buffering
Enabling Multicast Routing
Configuring Limit on the Number of Route Entries
Configuring Suppression on the Multicast Source Port
Clearing Multicast Forwarding and Routing Entries
Configuring a Multicast MAC Address Entry
Configuring Dropping Unknown Multicast Packets
Tracing a Multicast Path
2.1.1 Enabling Multicast Packet Buffering
With the multicast packet buffering feature enabled, multicast packets delivered to the
CPU are buffered while the corresponding multicast forwarding entries are being
created and then forwarded out according to the multicast forwarding entries after entry
creation.
This mechanism buffers multicast packets at the price of impact to the CPU and extra
memory usage.
Chapter 2 Common Multicast Configuration
Task
2-1
Remarks
Optional
Required
Optional
Optional
Optional
Optional
Optional
Optional