Configuring Ospf To Redistribute External Routes - H3C S5600 Series Operation Manual

Operation Manual – Routing Protocol
H3C S5600 Series Ethernet Switches
Configure the maximum
number of OSPF ECMP
routes

4.6.7 Configuring OSPF to Redistribute External Routes

Follow these steps to configure OSPF to redistribute external routes:
To do...
Enter system view
Enter OSPF view
Configure OSPF to
redistribute routes
from another
protocol
Configure OSPF to
filter outgoing routes
Enable OSPF to
import the default
route
Configure the default
parameters for
redistributed routes,
including cost,
interval, limit, tag,
and type
To do...
multi-path-number value
Use the command...
system-view
ospf [ process-id [ router-id
router-id ] ]
import-route protocol
[ process-id | allow-ibgp ]
[ cost value | type value | tag
value | route-policy
route-policy-name ] *
filter-policy { acl-number |
ip-prefix ip-prefix-name }
export [ protocol ]
default-route-advertise
[ always | cost value | type
type-value | route-policy
route-policy-name ]*
default { cost value | interval
seconds | limit routes | tag tag |
type type } *
Use the command...
4-23
Chapter 4 OSPF Configuration
Remarks
Optional
4 by default
Remarks
—
—
Required
By default, OSPF does not
import the routing
information of other
protocols.
Optional
By default, OSPF does not
filter advertised routes.
Optional
By default, OSPF does not
import the default route.
Optional
These parameters
respectively default to:
Cost: 1
Interval: 1 (second)
Limit: 1000
Tag: 1
Type: 2