Chapter 2 Basic System Configuration And Debugging; Displaying The System Status; Debugging The System; Enabling/Disabling System Debugging - H3C S5600 Series Operation Manual

Operation Manual – System Maintenance and Debugging
H3C S5600 Series Ethernet Switches
Enter system view from
user view
Set the system name of
the switch
Return from current view
to lower level view
Return from current view
to user view

2.2 Displaying the System Status

Display the current date and time of
the system
Display the version of the system
Display the information about users
logging onto the switch

2.3 Debugging the System

2.3.1 Enabling/Disabling System Debugging

The device provides various debugging functions. For the majority of protocols and
features supported, the system provides corresponding debugging information to help
users diagnose errors.
The following two switches control the display of debugging information:
Protocol debugging switch, which controls protocol-specific debugging information
Screen output switch, which controls whether to display the debugging information
on a certain screen.
Figure 2-1
screen output switch. Assume that the device can output debugging information to
module 1, 2 and 3. Only when both are turned on can debugging information be output
on a terminal.
To do... Use the command...
system-view
sysname sysname
quit
return
To do...
illustrates the relationship between the protocol debugging switch and the
Chapter 2 Basic System Configuration
—
Optional
By default, the name is H3C.
Optional
If the current view is user
view, you will quit the current
user interface.
Optional
The composite key <Ctrl+Z>
has the same effect with the
return command.
Use the command...
display clock
display version
display users [ all ]
2-2
and Debugging
Remarks
Remarks
Available in
any view