H3C S5600 Series Operation Manual page 308

Operation Manual – MSTP
H3C S5600 Series Ethernet Switches
I. Configuration prerequisites
The switch to be configured is connected to another manufacturer's switch adopting a
proprietary spanning tree protocol. MSTP and the network operate normally.
II. Configuration procedure
Follow these steps to configure digest snooping:
Enter system view
Enter Ethernet port view
Enable the digest
snooping feature
Return to system view
Enable the digest
snooping feature globally
Display the current
configuration
To do...
system-view
interface interface-type
interface-number
stp
config-digest-snooping
quit
stp
config-digest-snooping
display
current-configuration
Use the command...
1-49
Chapter 1 MSTP Configuration
Remarks
—
—
Required
The digest snooping
feature is disabled on a
port by default.
—
Required
The digest snooping
feature is disabled
globally by default.
Available in any view