Configuring Timers - H3C S5600 Series Operation Manual

Operation Manual – Multicast
H3C S5600 Series Ethernet Switches
Working with PIM-SSM, IGMPv3 enables hosts to join specific multicast sources and
groups directly, greatly simplifying multicast routing protocols and optimizing the
network topology.
Follow these steps to configure the version of IGMP Snooping:
To do...
Enter system view
Enter VLAN view
Configure the
version of IGMP
Snooping
Caution:
Before configuring related IGMP Snooping functions, you must enable IGMP
Snooping in the specified VLAN.
Different multicast group addresses should be configured for different multicast
sources because IGMPv3 Snooping cannot distinguish multicast data from different
sources to the same multicast group.

6.2.3 Configuring Timers

This section describes how to configure the aging timer of the router port, the aging
timer of the multicast member ports, and the query response timer.
Follow these steps to configure timers:
To do...
Enter system view
Configure the aging
timer of the router
port
Configure the query
response timer
Configure the aging
timer of the multicast
member port
Use the command...
system-view
vlan vlan-id
igmp-snooping version
version-number
Use the command...
system-view
igmp-snooping
router-aging-time
seconds
igmp-snooping
max-response-time
seconds
igmp-snooping
host-aging-time
seconds
6-7
Chapter 6 IGMP Snooping Configuration
Remarks
—
—
Optional
The default IGMP Snooping
version is version 2.
Remarks
—
Optional
By default, the aging time of the
router port is 105 seconds.
Optional
By default, the query response
timeout time is 10 seconds.
Optional
By default, the aging time of
multicast member ports is 260
seconds