File Attribute Configuration; Introduction To File Attributes - H3C S5600 Series Operation Manual

Operation Manual – File System Management
H3C S5600 Series Ethernet Switches
3
4
5
6
7
8 (*)
9
15367 KB total (4631 KB free)
(*) -with main attribute
(*b) -with both main and backup attribute
<Sysname> dir unit1>flash:/test/
Directory of unit1>flash:/test/
1
15367 KB total (2025 KB free)
(*) -with main attribute
(*b) -with both main and backup attribute

1.2 File Attribute Configuration

1.2.1 Introduction to File Attributes

The following three startup files support file attribute configuration:
App files: An app file is an executable file, with .bin as the extension.
Configuration files: A configuration file is used to store and restore configuration,
with .cfg as the extension.
Web files: A Web file is used for Web-based network management, with .web as
the extension.
The app files, configuration files, and Web files support three kinds of attributes: main,
backup and none, as described in
-rwh 428 Apr 02 2000 00:47:30
-rwh 572 Apr 02 2000 00:47:38
-rw- 1220 Apr 02 2000 00:06:57
-rw- 5026103 Jan 01 1970 00:04:34
-rwh 88 Apr 01 2000 23:55:53
-rw- 1376 Apr 02 2000 01:56:28
drw- - Apr 04 2000 04:50:07
(b) -with backup attribute
-rw- 1376 Apr 04 2000 04:50:30
(b) -with backup attribute
Chapter 1 File System Management Configuration
Table 1-1.
1-6
hostkey
serverkey
song.cfg
testv1r1.bin
private-data.txt
config.cfg
test
1.cfg