H3C S5600 Series Operation Manual
  1. Manuals
  2. Brands
  3. H3C Manuals
  4. Network Router
  5. H3C S5600 Series
  6. Operation manual
H3C S5600 Series Operation Manual

H3C S5600 Series Operation Manual

Hide thumbs Also See for S5600 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual
Operation Manual - IRF Fabric
H3C S5600 Series Ethernet Switches-Release 1510
Chapter 1 IRF Fabric Configuration............................................................................................. 1-1
1.1 Overview ............................................................................................................................ 1-1
1.1.1 Introduction to IRF................................................................................................... 1-1
1.1.2 Introduction to RMON on IRF.................................................................................. 1-2
1.2 Peer Fabric Port Detection ................................................................................................ 1-2
1.2.1 Introduction to the Peer Fabric Port Detection Function ......................................... 1-2
1.2.2 Work Flow of the Peer Fabric Port Detection Function........................................... 1-2
1.2.3 Prompt Information and Solution............................................................................. 1-3
1.3 IRF Fabric Configuration.................................................................................................... 1-5
1.3.1 Introduction to IRF Fabric Configuration ................................................................. 1-5
1.3.2 Setting a Unit ID for a Switch .................................................................................. 1-5
1.3.3 Specifying the Fabric Port of a Switch .................................................................... 1-7
1.3.4 Assigning a Unit Name to a Switch ......................................................................... 1-7
1.3.5 Assigning an IRF Fabric Name to a Switch ............................................................ 1-8
1.4 Displaying and Debugging IRF Fabric ............................................................................... 1-8
1.5 IRF Fabric Configuration Example..................................................................................... 1-9
1.5.1 Network Requirements............................................................................................ 1-9
1.5.2 Network Diagram..................................................................................................... 1-9
1.5.3 Configuration Procedure ....................................................................................... 1-10

Table of Contents

i
Table of Contents

Advertisement

Table of Contents
loading

Related Manuals for H3C S5600 Series

Summary of Contents for H3C S5600 Series

  • Page 1: Table Of Contents

    Operation Manual – IRF Fabric H3C S5600 Series Ethernet Switches-Release 1510 Table of Contents Table of Contents Chapter 1 IRF Fabric Configuration..................... 1-1 1.1 Overview ..........................1-1 1.1.1 Introduction to IRF....................1-1 1.1.2 Introduction to RMON on IRF.................. 1-2 1.2 Peer Fabric Port Detection ....................1-2 1.2.1 Introduction to the Peer Fabric Port Detection Function .........

  • Page 2: Chapter 1 Irf Fabric Configuration

    Operation Manual – IRF Fabric H3C S5600 Series Ethernet Switches-Release 1510 Chapter 1 IRF Fabric Configuration Chapter 1 IRF Fabric Configuration 1.1 Overview 1.1.1 Introduction to IRF Several IRF (intelligent resilient framework) supported switches of the same model can be interconnected to form a fabric, in which each switch is a unit. The ports used to interconnect all the units are called fabric ports, and the other ports that are used to connect the fabric to users are called user ports.

  • Page 3: Introduction To Rmon On Irf

    After the configurations are consistent, you can collect RMON history and statistics of any unit from any switch in the fabric. For detailed information about RMON, refer to the SNMP-RMON Operation part in H3C S5600 Series Ethernet Switches Operation Manual.

  • Page 4: Prompt Information And Solution

    Operation Manual – IRF Fabric H3C S5600 Series Ethernet Switches-Release 1510 Chapter 1 IRF Fabric Configuration If the switch can receive DISC packets sent by the peer, the FTM module determines whether peer sending ports correspond to local receiving ports according to information in the packet.
  • Page 5 Operation Manual – IRF Fabric H3C S5600 Series Ethernet Switches-Release 1510 Chapter 1 IRF Fabric Configuration Prompt Analysis Solution Two fabric ports of the Pull out one end of same device (that is, cable the right port and the connect it to a fabric...

  • Page 6: Irf Fabric Configuration

    Operation Manual – IRF Fabric H3C S5600 Series Ethernet Switches-Release 1510 Chapter 1 IRF Fabric Configuration 1.3 IRF Fabric Configuration 1.3.1 Introduction to IRF Fabric Configuration FTM provides user interfaces. You can configure unit IDs, fabric name by using a related command.
  • Page 7 Operation Manual – IRF Fabric H3C S5600 Series Ethernet Switches-Release 1510 Chapter 1 IRF Fabric Configuration After an IRF fabric is established, you can use the following command to change the unit IDs of the switches in the IRF fabric.

  • Page 8: Specifying The Fabric Port Of A Switch

    IRF fabric 1.3.3 Specifying the Fabric Port of a Switch An S5600 series switch has two Cascade ports, which are used to connect the devices within a Fabric. It is necessary to enable the Fabric function for the Cascade ports and use local UP port to connect peer DOWN port or use local DOWN port to connect peer UP port.

  • Page 9: Assigning An Irf Fabric Name To A Switch

    Operation Manual – IRF Fabric H3C S5600 Series Ethernet Switches-Release 1510 Chapter 1 IRF Fabric Configuration Operation Command Description Assign a unit name to a set unit unit-id name Required switch unit-name 1.3.5 Assigning an IRF Fabric Name to a Switch Only the switches with the same IRF fabric name can form an IRF fabric.

  • Page 10: Irf Fabric Configuration Example

    Operation Manual – IRF Fabric H3C S5600 Series Ethernet Switches-Release 1510 Chapter 1 IRF Fabric Configuration Table 1-9 Display and debug FTM Operation Command Description Display the information display irf-fabric [ status ] about an IRF fabric Display topology display ftm { information |...

  • Page 11: Configuration Procedure

    Operation Manual – IRF Fabric H3C S5600 Series Ethernet Switches-Release 1510 Chapter 1 IRF Fabric Configuration 1.5.3 Configuration Procedure Configure Switch A. # Configure the unit ID as 1. <H3C> system-view [H3C] change unit-id 1 to 1 # Configure the unit name as unit 1.

Table of Contents