Displaying And Maintaining Qos Profile Configuration - H3C S5600 Series Operation Manual

Operation Manual – QoS-QoS Profile
H3C S5600 Series Ethernet Switches
Specify
the
mode to
apply a
QoS
profile
Follow these steps to apply a QoS profile manually:
Enter system view
Apply a
QoS
profile to
specific
ports

2.3 Displaying and Maintaining QoS Profile Configuration

Display QoS profile
configuration
To do...
Configure the
mode to apply
qos-profile port-based
a QoS profile
as port-based
Configure the
mode to apply undo qos-profile
a QoS profile port-based
as user-based
To do...
In system view
Enter
Ethernet
port view
In
Ethernet
Apply a
port
QoS profile
view
to the
current
port
To do...
display qos-profile { all |
name profile-name |
interface interface-type
interface-number | user
user-name }
Chapter 2 QoS Profile Configuration
Use the command...
Use the command...
system-view
apply qos-profile
profile-name interface
interface-list
interface interface-type
interface-number
apply qos-profile
profile-name
Use the command...
2-4
Remarks
Optional
By default, the mode to
apply a QoS profile is
user-based.
If the 802.1x
authentication mode
is MAC
address-based,
mode to apply a QoS
profile must
configured
user-based.
If the 802.1x
authentication mode
is port-based,
mode to apply a QoS
profile must
configured
port-based.
Remarks
—
Select either of
the operations.
By default, a port
has no QoS
profile applied to
it.
Remarks
Available in any view
the
be
the
be
as