Displaying And Maintaining Smart Link; Smart Link Configuration Example; Implementing Link Redundancy Backup - H3C S5600 Series Operation Manual

Hide thumbs Also See for H3C S5600 Series:
Table of Contents

Advertisement

Operation Manual – Smart Link-Monitor Link
H3C S5600 Series Ethernet Switches
9)
If no control VLAN is configured for flush message processing, the device will
forward received flush messages without processing them.
10) If the control VLAN for receiving flush messages configured on an associated
device is different than the one for sending flush messages configured on the
corresponding Smart Link device, the device will forward received flush messages
without processing them.
11) In the static or manual link aggregation group which serves as a smart link group
member, if a member port can process flush messages, this function cannot be
synchronized to the other ports in the aggregation group automatically, that is, the
other member ports in the aggregation group cannot process flush messages. The
function of processing flush messages must be manually configured for each port
in the aggregation group.
12) The VLAN configured as a control VLAN to send and receive flush messages must
exist. You cannot directly remove the control VLAN. When a dynamic VLAN is
configured as the control VLAN for the smart link group, this VLAN will become a
static VLAN, and the prompt information is displayed.

1.3 Displaying and Maintaining Smart Link

Display the information of
a smart link group
Display the statistics
information of flush
messages received and
processed by the current
device
Clear flush message
statistics

1.4 Smart Link Configuration Example

1.4.1 Implementing Link Redundancy Backup

I. Network requirements
As shown in
Switch D and Switch E support Smart Link. Configure Smart Link feature to provide
remote PCs with reliable access to the server.
To do...
display smart-link group
{ group-id | all }
display smart-link flush
reset smart-link packets
counter
Figure
1-3, Switch A is an H3C S5600 series Ethernet switch. Switch C,
Use the command...
1-7
Chapter 1 Smart Link Configuration
Remarks
Available in any view.
Available in user view.

Advertisement

Table of Contents
loading

This manual is also suitable for:

S5600-26cS5600-26c-pwrS5600-26fS5600-50cS5600-50c-pwr

Table of Contents