H3C S5600 Series Operation Manual page 1098

Operation Manual – Information Center
H3C S5600 Series Ethernet Switches
Set the format of time
stamp in the output
information
Note:
To view the debugging information of some modules on the switch, you need to set the
type of the output information to debug when configuring the system information output
rules, and use the debugging command to enable debugging for the corresponding
modules.
Table 1-4 Default output rules for different output directions
Output
direction
Console
Monitor
terminal
Log host
Trap
buffer
Log
buffer
SNMP
NMS
To do...
info-center timestamp
{ log | trap | debugging }
{ boot | date | none }
LOG
Modules
Enabl
allowed
ed/dis
abled
default
Enabl
(all
ed
modules)
default
Enabl
(all
ed
modules)
default
Enabl
(all
ed
modules)
default
Disabl
(all
ed
modules)
default
Enabl
(all
ed
modules)
default
Disabl
(all
ed
modules)
Use the command...
TRAP
Enable
Severi
d/disab
ty
led
warnin Enable
gs d
warnin Enable
gs d
inform Enable
ational d
inform Enable
ational d
warnin Disable
gs d
debug Enable
ging d
1-11
Chapter 1 Information Center
Remarks
Optional
By default, the time stamp
format of the log and trap
output information is date,
and that of the debugging
output information is
boot.
DEBUG
Enable
Severit
d/disab
y
led
debuggi Enable debuggi
ng d ng
debuggi Enable debuggi
ng d ng
debuggi Disable debuggi
ng d ng
warning Disable debuggi
s d ng
debuggi Disable debuggi
ng d ng
warning Disable debuggi
s d ng
Severit
y