Tcp Test (Tcpprivate Test) On The Specified Ports - H3C S5600 Series Operation Manual

Operation Manual – HWPing
H3C S5600 Series Ethernet Switches
[Sysname-hwping-administrator-snmp] display hwping results administrator
snmp
HWPing entry(admin administrator, tag snmp) test result:
Destination ip address:10.2.2.2
Send operation times: 10
Min/Max/Average Round Trip Time: 9/11/10
Square-Sum of Round Trip Time: 983
Last complete test time: 2000-4-3 8:57:20.0
Extend result:
SD Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0
System busy operation number: 0
Operation sequence errors: 0
Other operation errors: 0
[Sysname-hwping-administrator-snmp] display hwping history administrator
snmp
HWPing entry(admin administrator, tag snmp) history record:
Index
10
For detailed output description, see the corresponding command manual.

1.3.7 TCP Test (Tcpprivate Test) on the Specified Ports

I. Network requirements
Both the HWPing client and the HWPing server are H3C S5600 series Ethernet
switches. Perform a HWPing Tcpprivate test to test time required to establish a TCP
connection between this end (Switch A) and the specified destination end (Switch B),
with the port number set to 8000.
Response Status
1 10
2 10
3 10
4 10
5 9
6 11
7 10
8 10
9 10
10
Chapter 1 HWPing Configuration
Receive response times: 10
DS Maximal delay: 0
Operation timeout number: 0
Connection fail number: 0
Drop operation number: 0
LastRC
1 0 2000-04-03 08:57:20.0
1 0 2000-04-03 08:57:20.0
1 0 2000-04-03 08:57:20.0
1 0 2000-04-03 08:57:19.9
1 0 2000-04-03 08:57:19.9
1 0 2000-04-03 08:57:19.9
1 0 2000-04-03 08:57:19.9
1 0 2000-04-03 08:57:19.9
1 0 2000-04-03 08:57:19.8
1 0 2000-04-03 08:57:19.8
1-32
Time