H3C S5600 Series Operation Manual page 939

Operation Manual – PoE-PoE Profile
H3C S5600 Series Ethernet Switches
II. Network diagram
GE1/0/1~GE1/0/5
IP Phone
IP Phone
IP Phone
IP Phone
Figure 2-1 PoE profile application
III. Configuration procedure
# Create Profile 1, and enter PoE profile view.
<SwitchA> system-view
[SwitchA] poe-profile Profile1
# In Profile 1, add the PoE policy configuration applicable to GigabitEthernet 1/0/1
through GigabitEthernet 1/0/5 ports for users of group A.
[SwitchA-poe-profile-Profile1] poe enable
[SwitchA-poe-profile-Profile1] poe mode signal
[SwitchA-poe-profile-Profile1] poe priority critical
[SwitchA-poe-profile-Profile1] poe max-power 3000
[SwitchA-poe-profile-Profile1] quit
# Display detailed configuration information for Profile1.
[SwitchA] display poe-profile name Profile1
Poe-profile: Profile1, 3 action
poe enable
poe max-power 3000
poe priority critical
# Create Profile 2, and enter PoE profile view.
Network
Switch A
GE1/0/6~GE1/0/10
AP
AP
AP
AP
2-4
Chapter 2 PoE Profile Configuration