H3C S5600 Series Operation Manual page 937

Operation Manual – PoE-PoE Profile
H3C S5600 Series Ethernet Switches
Configure
the
relevant
features in
PoE
profile
Quit system view
Apply the
existing
PoE
profile to
the
specified
Ethernet
port
Note the following during the configuration:
1) When the apply poe-profile command is used to apply a PoE profile to a port,
some PoE features in the PoE profile can be applied successfully while some
cannot. PoE profiles are applied to S5600 series Ethernet switches according to
the following rules:
When the apply poe-profile command is used to apply a PoE profile to a port, the
PoE profile is applied successfully only if one PoE feature in the PoE profile is
applied properly. When the display current-configuration command is used for
query, it is displayed that the PoE profile is applied properly to the port.
If one or more features in the PoE profile are not applied properly on a port, the
switch will prompt explicitly which PoE features in the PoE profile are not applied
properly on which ports.
To do...
Enable the PoE
feature on a port
Configure PoE
mode for Ethernet
ports
Configure the PoE
priority for Ethernet
ports
Configure the
maximum power for
Ethernet ports
In system view
Enter
Ethernet
port
view
In
Ethernet
Apply
port
the
view
existing
PoE
profile to
the port
2-2
Chapter 2 PoE Profile Configuration
Use the command...
poe enable
poe mode { signal | spare }
poe priority { critical | high
| low }
poe max-power max-power
quit
apply poe-profile
profile-name interface
interface-type
interface-number [ to
interface-type
interface-number ]
interface interface-type
interface-number
apply poe-profile
profile-name
Remarks
Required
Disabled by
default.
Optional
signal by
default.
Optional
low by default.
Optional
15,400 mW by
default.
—
Use either
approach.