Operation Manual – IPv6 Management
H3C S5600 Series Ethernet Switches
Figure 1-2 Convert a MAC address into an EUI-64 address
1.1.3 Introduction to IPv6 Neighbor Discovery Protocol
The IPv6 Neighbor Discovery Protocol (NDP) uses five types of ICMPv6 messages to
implement the following functions:
Address resolution
Neighbor unreachability detection
Duplicate address detection
Router/prefix discovery
Address autoconfiguration
Redirection
Table 1-3
Table 1-3 Types and functions of ICMPv6 messages
Neighbor solicitation (NS) message
Neighbor advertisement (NA) message
Router solicitation (RS) message
lists the types and functions of ICMPv6 messages used by the NDP.
ICMPv6 message
Used to acquire the link-layer address of
a neighbor
Used to verify whether the neighbor is
reachable
Used to perform a duplicate address
detection
Used to respond to a neighbor
solicitation message
When the link layer address changes,
the local node initiates a neighbor
advertisement message to notify
neighbor nodes of the change.
After started, a host sends a router
solicitation message to request the
router for an address prefix and other
configuration information for the purpose
of autoconfiguration.
1-7
Chapter 1 IPv6 Configuration
Function