Configuring Ficon Emulation - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

FIGURE 159
NOTE
IPSec settings cannot be edited. If you want to change settings, you will need to delete the tunnel
and then create a new tunnel with the new settings.

Configuring FICON emulation

FICON emulation and acceleration features and operating parameters are configured from the
FICON Emulation tab
features you want to implement, and you must look closely at the operational parameters to
determine if values other than the default values are better for your installation.
FIGURE 160
DCFM Enterprise User Manual
53-1001775-01
Advanced Settings Security Tab for the 8 Gbps extension switch and blade
(Figure 160). Before you configure these features you must decide which
FICON Emulation configuration tab
Configuring FICON emulation
16
399