Deleting A Boot Lun Zone; Zoning Administration; Comparing Zone Databases - Brocade Communications Systems WFT-2D User Manual

9. Click Yes.

Deleting a Boot LUN zone

Boot LUN zones are deleted the same way that standard zones are deleted. Refer to
zone"

Zoning administration

This section provides instructions for performing administrative functions with zoning. You can
rename, duplicate, delete, and perform other tasks on zone members, zones, and zone
configurations.

Comparing zone databases

You can compare zone databases against one another to identify any and all differences between
their memberships prior to sending them to the switch. Once the two databases have been
compared, icons display to show the differences between the two databases. These icons are
illustrated and described in
TABLE 69
Icon
To compare two zone databases, complete the following steps.
1. Select Configure > Zoning > Fabric.
2. Select Compare from the Zone DB Operation list.
Brocade Network Advisor SAN User Manual
53-1003154-01
A message displays that a Boot LUN zone already exists and asks whether you want to
overwrite the existing zone.
The existing Boot LUN zone is replaced by the version you just created.
on page 894 for instructions.
Table
Compare icon indicators
Description
Added — Displays when an element is added to the editable database.
Modified — Displays when an element is modified on the editable database.
Removed — Displays when an element is removed from the editable database.
The Zoning dialog box displays.
The Compare/Merge Zone DBs dialog box displays, as shown in
69.
Zoning administration
"Deleting a
Figure 423.
21
923