Brocade Communications Systems Brocade 8/12c Command Reference Manual page 688

22
portCfgFillword
To set the fill word of a port to ARBFF-ARBFF using the -arbff-arbff option:
To set the fill word of a port to IDLE-ARBFF using the -idle-arbff option:
To set the fill word of a port to the preferred mode 3 (If hardware arb-arbff fails, try software idle-arbff) and
using the passive option:
SEE ALSO
portCfgShow
654
switch:admin> portcfgfillword 2/3, -arbff-arbff
switch:admin> portcfgfillword 27, -idle-arbff
switch:admin> portcfgshow 27
Area Number:
Speed Level:
Fill Word(On Active)
Fill Word(Current)
(output truncated)
switch:admin> portcfgfillword 28 -aa-then-ia passive
switch:admin> portcfgshow 28
Area Number:
Speed Level:
Fill Word(On Active)
Fill Word(Current)
(output truncated)
switch:admin> portcfgshow
Ports of Slot 0 16 17 18 19
--------------------+---+---+---+---+-----+---+---+---+-----+---+---+
Speed AN AN AN AN
Fill Word(On Active)0
Fill Word(current) 0
(output truncated)
27
AUTO(HW)
2(SW Idle-Arbff)
2(SW Idle-Arbff)
28
AUTO(HW)
3(A-A then SW I-A)
0(Idle-Idle)
20 21 22 23
AN AN AN AN
0 0 0 0 0 0 0
0 0 0 0 0 0 0
24 25 26 27 28 29 30 31
AN AN AN AN AN AN AN AN
0 0 0 2 3 0 0
0 0 0 2 0 0 0
Fabric OS Command Reference
0
0
53-1001764-01