Brocade Communications Systems Brocade 8/12c Command Reference Manual page 678

22
portCfgEport
-h
EXAMPLES
To disable E_Port capability on a port:
To enable E_Port capability on a port:
To lock down the port as an E_Port.
To disable E_Port capability on a range of ports specified by their index number:
To enable E_Port capability on all ports of slot 3-5:
SEE ALSO
portShow, portSwapDisable, portSwapShow,
644
mode
Specifies the E_Port configuration as one of the following:
0
Disables E_Port capability for the specified ports.
1
Enables the ports as E_Ports. This is the default port state.
2
Locks down the ports as E_Ports. This command effectively disables the port's
F_Port capability.
Displays the command usage.
switch:admin> portcfgeport 1/3 0
switch:admin> portcfgeport 1/3 1
switch:admin> portcfgeport 1/3 2
switch:admin> portcfgeport -i 12-18 0
switch:admin> portcfgeport -s 3-5 1
switchShow
Fabric OS Command Reference
53-1001764-01