Brocade Communications Systems Brocade 8/12c Command Reference Manual page 664

22
portCfgAutoDisable
--add
--remove
--addall
--removeall
--addexcept
--show
option
EXAMPLES
To disable the port autodisable feature on single port:
To enable the port autodisable feature on a single port:
To add multiple trigger conditions to the port autodisable configuration on a single port:
630
Specifies one or more trigger conditions that will disable the specified ports.
Trigger conditions must be separated by a space, for example, LOSN OLS LIP.
Trigger conditions are case insensitive.
Removes one or more trigger conditions from the port autodisable configuration.
Adds all supported trigger conditions to the port autodisable configuration.
Removes all supported trigger conditions from the port autodisable configuration.
This command removes the triggers only; it does not disable the port autodisable
flag.
Adds all supported trigger conditions to the port autodisable configuration except
the one specified .
Displays the port autodisable configuration.
Specify one or more the following options (supported with the --add, --remove,
and --addexcept operands):
LOSN
Loss of Sync
LOSNG
Loss of Signal
OLS
Offline Primitive Sequence
NOS
Not Operational Primitive Sequence
LIP
Loop Initialization Primitive Sequence
switch:admin> portcfgautodisable --disable 18
switch:admin> portcfgautodisable --show 18
Port Auto Disable: OFF
Configured Option(s):No events configured. Port will
not be automatically disabled.
switch:admin> portcfgautodisable --enable 18
switch:admin> portcfgautodisable --show 18
Port Auto Disable: ON
Configured Option(s):No events configured. Port will
not be automatically disabled.
switch:admin> portcfgautodisable --add losn lip ols 18
switch:admin> portcfgautodisable --show 18
Port Auto Disable: ON
Configured Option(s): LOSN OLS LIP
Fabric OS Command Reference
53-1001764-01