Brocade Communications Systems Brocade 8/12c Command Reference Manual page 640

22
portCfg
To display the VLAN tag configuration (for an explanation of the flags, refer to portShow):
To create a VLAN tag entry for a failover crossport interface with a VLAN ID of 200 and an L2 CoS value
of 1 and to display the configuration:
To delete a VLAN tag entry:
To delete a VLAN tag entry for a crossport:
FUNCTION
Commands supported only on the Brocade 7800 and the Brocade FX8-24 platforms
SYNOPSIS
portcfg action [slot/]ve_port options arguments
DESCRIPTION
Use this command to configure FCIP tunnels and FCIP circuits on the GbE/10GbE ports on the Brocade
7800 and FX8-24 platforms only and to configure the inband management on these platforms. The FCIP
tunnels on the local and remote GbE ports act as Virtual E_Ports (VE_Ports) connecting the local and
remote fabrics. The following operations can be performed with this command:
•
606
switch:admin> portshow vlantag ge2
Port: ge2
Interface Address
Destination Address
-------------------------------------------------------------
192.168.2.10
0.0.0.0
192.168.0.20
192.168.0.10
192.168.0.21
192.168.0.11
2000::20
2000::10
2000::21
2000::11
switch:admin> portcfg vlantag 8/xge0 add 192.168.11.20 200 1 -x
Operation Succeeded
switch:admin> portshow vlantag 8/xge0
Port: 8/xge0
Interface Address
Destination Address
----------------------------------------------------------
192.168.11.20
0.0.0.0
switch:admin> portcfg vlantag ge2 delete 192.168.2.10 200
Operation Succeeded
switch:admin> portcfg vlantag 8/xge0 delete 192.168.11.20 200 -x
Operation Succeeded
portcfg fciptunnel - Create, modify, and delete Fibre Channel over IP (FCIP) tunnels.
-
Configure a tunnel with the FCIP FastWrite feature.
-
Enable or disable Tape Pipelining.
-
Configure the compression options.
-
Configure an IPSec-enabled tunnel.
VlanId L2CoS Flags
200 5 Perm Net
100 0 Perm
200 0 Perm
300 0 Perm
400 0 Perm
VlanId L2CoS Flags
200 1 Perm Net (crossport)
Fabric OS Command Reference
53-1001764-01