Notes On Using Controller - Fujitsu 8FX Hardware Manual

CHAPTER 29 SYSTEM CONFIGURATION CONTROLLER

29.3 Notes on Using Controller

29.3 Notes on Using Controller
This section provides notes on using the controller.
■ Setting PPGSEL to "0" When Using Multi-pulse Generator (MPG)
While the MPG is in use, the P62 to P67 pins are being used as MPG output pins. In this
situation, if it is necessary to use the PPG function, set the PPGSEL bit to "0" to switch the
PPG output pins to the P10, P11, and P13 to P16 pins.
608 FUJITSU SEMICONDUCTOR LIMITED
MB95630H Series
MN702-00009-2v0-E