Fujitsu 8FX Hardware Manual page 5

PREFACE
■ The Purpose and Intended Readership of This Manual
Thank you very much for your continued special support for Fujitsu Semiconductor products.
The MB95630H Series is a line of products developed as general-purpose products in the New
8FX family of proprietary 8-bit single-chip microcontrollers applicable as application-specific
integrated circuits (ASICs). The MB95630H Series can be used for a wide range of
applications from consumer products including portable devices to industrial equipment.
Intended for engineers who actually develop products using the MB95630H Series of
microcontrollers, this manual describes its functions, features, and operations. You should read
through the manual.
This manual is written to explain the respective configurations and operations of peripheral
functions, but not to provide specifications of a device.
For detailed specifications of a device, refer to its data sheet.
For details on individual instructions, refer to "F
Note: F
■ Trademark
The company names and brand names in this document are the trademarks or registered
trademarks of their respective owners.
■ Sample Programs
Fujitsu Semiconductor provides sample programs free of charge to operate the peripheral
resources of the New 8FX family of microcontrollers. Feel free to use such sample programs to
check the operational specifications and usages of Fujitsu microcontrollers.
Note that sample programs are subject to change without notice. As these pieces of software
are offered to show standard operations and usages, evaluate them sufficiently before use with
your system. Fujitsu Semiconductor assumes no liability for any damages whatsoever arising
out of the use of sample programs.
2
MC is the abbreviation of FUJITSU Flexible Microcontroller.
2
MC-8FX Programming Manual".
i