Notes On Handling The Emulation Pod - Fujitsu MB2145-507 Hardware Manual

1.6

Notes on Handling the Emulation Pod

When handling the product, observe the precautions below.
Notes on Handling the Emulation Pod
WARNING
Electric shock Before connecting or disconnecting cables, turn off the power to
the emulation pod and connected devices, and disconnect the
power plug from the receptacle.
Failure to do so may cause an electric shock.
Do not put your fingers in the connector inlet.
Putting your fingers in the connector inlet can result in an electric
shock or failure.
Plug If you hear thunder, disconnect the power plug from the receptacle.
Using the emulation pod during a thunderstorm can damage the
emulation pod or cause a fire.
No disassembly Never open the emulation pod case. Do not modify the emulation
pod without permission.
Opening the case or modifying the emulation pod may cause a
failure, fire, or electric shock.
No moisture Do not use the emulation pod in a wet area such as a bathroom or
shower room.
Using the emulation pod in a wet area may cause a failure, fire, or
electric shock.
1.6 Notes on Handling the Emulation Pod
9