Notes On Using Reset - Fujitsu 8FX Hardware Manual

CHAPTER 4 RESET

4.3 Notes on Using Reset

4.3 Notes on Using Reset
This section provides notes on using the reset.
■ Notes on Using Reset
● Initialization of registers and bits by reset source
Some registers and bits are initialized only by a certain reset source.
• The type of reset source determines which bit in the reset source register (RSRR) is to be
initialized.
• The oscillation stabilization wait time setting register (WATR) of the clock controller can
only be initialized by a power-on reset.
70 FUJITSU SEMICONDUCTOR LIMITED
MB95630H Series
MN702-00009-2v0-E