Configuration - Fujitsu 8FX Hardware Manual

CHAPTER 14 LIN-UART
MB95630H Series

14.2 Configuration

14.2 Configuration
LIN-UART is made up of the following blocks.
• Reload counter
• Receive control circuit
• Receive shift register
• LIN-UART receive data register (RDR)
• Transmit control circuit
• Transmit shift register
• LIN-UART transmit data register (TDR)
• Error detection circuit
• Oversampling circuit
• Interrupt generation circuit
• LIN synch break/synch field detection circuit
• Bus idle detection circuit
• LIN-UART serial control register (SCR)
• LIN-UART serial mode register (SMR)
• LIN-UART serial status register (SSR)
• LIN-UART extended status control register (ESCR)
• LIN-UART extended communication control register (ECCR)
200 FUJITSU SEMICONDUCTOR LIMITED MN702-00009-2v0-E