Show Uplink - Dell PowerConnect W-7200 Series Reference Manual

show uplink

crypto-local
show uplink [config|{connection <link_id>}|signal|{stats <link_id}]
Description
Displays uplink configuration details on an W-600 series controller.
Syntax
Parameter
config
connection
signal
stats
Example
The output of this command displays the controller uplink status .
(host) ##show uplink
Uplink Manager: Enabled
Uplink Management Table
-----------------------
Id Uplink Type
-- -----------
1 Wired
2 Cellular
Command History
Introduced in ArubaOS 3.4.
Command Information
Platforms
W-600 series controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Enter the keyword config to display the uplink manager, the default wired priority
and default cellular priority
Enter the keyword connection followed by the uplink ID number to display the
connection details.
Enter the keyword signal to display the cellular uplink signal strength.
Enter the keyword stats followed by the uplink ID number to display the statistical
information on the designated uplink.
Properties Priority
---------- -------
vlan 1 200
Novatel_U727 100
Licensing
Base operating system
State Status
----- ------
Initializing Waiting for link
Standby Ready
Command Mode
Config mode on master and local controllers
show uplink | 1293