Show Management Access-List - D-Link DES-3010GA Cli Manual

D-Link DES-3010FA/GA CLI Reference Guide

show management access-list

The show management access-list Privileged EXEC mode command displays management access-lists.
Syntax
show management access-list [name]
Parameters
•
name — Specifies the name of a management access list. (Range: 1 - 32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the mlist management access list.
Console# show management access-list mlist
mlist
-----
permit ethernet 1
permit ethernet 2
! (Note: all other access implicitly denied)
Page 147