Table of Contents
Advertisement
D-Link DES-3010FA/GA CLI Reference Guide
show management access-list
The show management access-list Privileged EXEC mode command displays management access-lists.
Syntax
show management access-list [name]
Parameters
•
name — Specifies the name of a management access list. (Range: 1 - 32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the mlist management access list.
Console# show management access-list mlist
mlist
-----
permit ethernet 1
permit ethernet 2
! (Note: all other access implicitly denied)
Page 147
Advertisement
Table of Contents
