Configuration > Igmp Snooping > Igmp Access Control Settings - D-Link DES-1210/ME Series Manual

4 Configuration
DES-1210/ME Series Metro Ethernet Managed Switch User Manual
the moment the last host leaves a group and when the multicast server is notified that there are no more
members. It also allows adjustments for controlling the frequency of IGMP traffic on a subnet. Default is 10
seconds.
Querier State: Specify to enable or disable the querier state.
Fast Leave: Specify to enable or disable the fast leave state.
State: Specify to enable or disable the IGMP Snooping state.
Data Driven Learning State: Specify to enable or disable the data driven learning state.
Querier Version: Specify the querier version of IGMP Snooping is v1, v2 or v3.
Report Suppression: Specify to enable or disable the report suppression.
Click Apply button to take configuration effects and click Previous Page button to back to the previous page.
Click Edit button to enter the Router Port Settings page, and the ports to be assigned as router ports for
IGMP snooping for the VLAN.
Figure 4.71 – Configuration > IGMP Snooping > IGMP Snooping-Router Port Settings
To view the Multicast Entry Table for a given VLAN, press the View button.
Figure 4.72– Configuration > IGMP Snooping > IGMP Snooping-Multicast Entry Table
Configuration > IGMP Snooping > IGMP Access Control Settings
The IGMP Access Control Settings page is used to enable or disable the IGMP access control of selected
ports.
46