Voicemail Pro Installation and Maintenance Guide
Configuring User Source Numbers
This tab in the User form gives a list of Source Numbers. Several of these numbers can relate to
voicemail operation.
Source Number: Default = V plus own extension number
Right-click within the Source Number area and click Add.
V<Callers CLI> = Voicemail Trusted Source access
Allows access to the user's mailbox from a specified CLI number, e.g. V201 or V7325551237 without
entering the mailbox access code. The default is the user's own extension number but additional
numbers may be added. Note: Only supported by Voicemail Lite and Voicemail Pro using IP Office
Mailbox mode.
H<Group Name> = Hunt Group Voicemail Indication
Allows the user to receive message waiting indication of new group messages. Enter H followed by the
group name, e.g. HMain. See Hunt Group Message Waiting Indication.
P<Telephone Number> = Voicemail Ringback Number
This entry sets the destination for callback (outbound alert) calls from voicemail. Enter P followed by the
telephone number including any necessary external dialing prefix, eg. P917325559876. This facility is
only available when using VoiceMail Pro through which a default Callback or a user specific Callback
start point has been configured. This feature is separate from voicemail ringback which alerts the user's
own extension. See Callback (Outcalling)
Page 128
Voicemail Pro Installation and Maintenance Guide
15-601063 Issue 15b (31 May 2006)
IP Office