Playwav Method - Avaya IP Office Voicemail Pro Installation And Maintenance Manual


wait - This is an optional parameter specifying whether voicemail should return
immediately or wait until the wave file has been played first.

interruptables - This is for future development and should be left as default.

dlgid - The connection ID as passed in to the script.

Return Value
The key press that was used to terminate the playback.

PlayWav Method

The PlayWav method is used to play a wave file through voicemail to the active connection.
Voice.PlayWav(
wav As String,
[wait As Boolean = True],
[interruptables As String = "Any"],
[dlgid As Long = 0]
) As String

Parameters

wav - This contains the name of the wave file to be played or the name of a system
parameter to be spoken. The following formats are allowable:






Voicemail Pro Installation and Maintenance Guide
IP Office
$NAM
Plays the recorded name for the mailbox if one has been recorded. If a name has
not been recorded then optional TTS can be used (providing it has been licensed).
$TIME:hh[:mm[:ss] [ Y][ dd[/mm[/yy]]]]
Plays out the specified time and date. The hours to speak must always be
specified and optional the number of minutes, seconds, day, month and year. For
example:

$TIME:11
Speaks AT ELEVEN HOUR HUNDRED

$TIME:11:55
Speaks AT ELEVEN HOUR FIFTY FIVE

$TIME:11:55:13
Speaks AT ELEVEN HOUR FIFTY FIVE

$TIME:11:55 Y
Speaks YESTERDAY AT ELEVEN HOUR FIFTY FIVE

$TIME:11:55:13 Y
Speaks YESTERDAY AT ELEVEN HOUR FIFTY FIVE

$TIME:11:55 21/09/03
Speaks AT ELEVEN HOUR FIFTY FIVE [1SEC PAUSE] DATE TWENTY
FIRST SEPTEMBER
$QPOS [:position]
This plays out "You are at queue position" position "in the queue".
$QTIM [:eta]
This plays out "Estimated time to answer is" eta "minutes".
$MSGN:msgs
Plays out the specified number of old messages (e.g. $MSGN:10 = "You have ten
new messages".
$MSGO:msgs
Plays out the specified number of old messages (e.g. $MSGN:0 = "You have no
old messages".
15-601063 Issue 15b (31 May 2006)
VBScript
Page 245