Local Configuration Of The Ip Dect Base Stations; Configuring The Avaya Dect Mobility Manager - Avaya Communication Manager IP DECT Installation, Administration And Maintenance Manual

With communication manager
Table of Contents

Advertisement

Step A. DHCP scope within the naive VLAN:
1. IP DECT base station boots up and obtains an address on the native VLAN.
2. The data VLAN DHCP Public option 225 directs the IP DECT base station to go to voice
VLAN.
Step B. DHCP scope within the voice VLAN:
1. IP DECT base station releases the data VLAN address and obtains an address on the voice
VLAN and all other parameters.
2. The voice VLAN does not have the DHCP Public option 225, because a IP DECT base
station already on the voice VLAN doesn't need to be directed to go there.
3. IP DECT base station is operational on the voice VLAN.
If a reboot or power cycle occurs, the IP DECT base station returns to step A.
If an IP DECT base station cannot obtain an address on the voice VLAN, due to network or
DHCP problems. In this case the IP DECT base station falls back automatically to untagged
frames (native VLAN).

Local configuration of the IP DECT base stations

The OM Configurator has to be member of the native VAN for the 1
within the set VLAN.

Configuring the Avaya DECT Mobility Manager

The ADMM can be configured via HTTP. The ADMM acts as a HTTP server. The HTTP server
binds to port 80 by default. If executed in host mode the port can be configured via command
line interface.
The configuration data will be either read from the internal flash memory or from a local file. A
local file is only used if specified on the command line on a PC host.
The configuration file is a human readable ASCII file. Changing the configuration file outside the
ADMM is not permitted.
The configuration file can be downloaded and uploaded via the web interface.
The service access is restricted to one active session at a time and is password protected.
The browser used for service access has to be at least Microsoft Internet Explorer 6.0 or Mozilla
Firefox 1.0 and must have frame support, java script and cookies enabled.
Configuring the Avaya DECT Mobility Manager
st
configuration, later on
Issue 1 August 2006
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ip dect

Table of Contents