Voicemail Pro Installation and Maintenance Guide
Configuring Group Broadcast
If the Broadcast option is enabled, a message for a hunt group is copied to the individual user mailboxes
of each hunt group member.
To configure Group Broadcast:
1. Using IP Office Manager, click
2. Click
Hunt Group and then double-click the required hunt group.
3. Click the Voicemail tab.
4. Check Broadcast.
5. Click OK.
6. Click
to merge the configuration change back to the IP Office.
Page 174
15-601063 Issue 15b (31 May 2006)
to receive the IP Office system's configuration.
Voicemail Pro Installation and Maintenance Guide
IP Office