Configuring The Avaya Interchange Interface - Avaya IP Office Voicemail Pro Installation And Maintenance Manual

Voicemail Pro Installation and Maintenance Guide
4. Return to the Audix command prompt screen. Inspect the system for the list of mailboxes that will
be eligible to receive messages.

Type change machine. Note the range of local extensions. List subscribers will
provide a more specific list. It is best to distinguish mailboxes that are eligible to receive
messages i.e. call answer mailboxes.

On page 2 of the change machine form, ensure that all the update settings are set to y.

Make sure that Network Turnaround is set to y. Select Enter.
5. To administer the password for message exchange:

From the S8100 home page select Administer System | Audix Networking |
Administrative Menu | Local Machine Administration.

Enter the password to be used for transfer of messages between this system and the
Avaya interchange. Select Change.
6. To enter the information for connecting to the Interchange:

From the S8100 home page select Administer System | Audix Networking |
Administrative Menu | Remote Machine Administration | Digital Machine
Administration.

Select Add New Machine.

Enter the Avaya interchange name, IP address and networking password.

Define the schedule for exchanging messages.

Select Add to complete.
7. To administer the parameters associated with the Interchange:

Type change machine <machine name> from the AUDIX command prompt.
Note If all extensions that are not on the Intuity Audix are configured to be on the
Interchange and "Send to non-Administered Recipients" is set to yes, errant messages
may be sent. This will waste bandwidth and processing time.

The extension Length setting is the dial plan length that has been configured in the Avaya
Interchange.

Set all the parameters of page 2 to y. (Send to non-administered recipients, Updates In,
Updates Out and Network Turnaround.)

Select F3 to Add the remote machine.

Configuring the Avaya Interchange Interface

For more information about the options that are mentioned in this section, refer to the Interchange
documentation which is available from www.support.avaya.com.
To configure the Interchange Intuity interface:
1. Log in to the Intuity interchange.

To verify that the system is optioned for TCP/IP digital ports select Customer/Service
Administration from the Interchange Main Menu.

The VPNM ports will also be required for interfacing to the Voicemail Pro.
2. Ensure that the TCP/IP networking is set up so that the machine can communicate to and from
the Intuity Audix.

From the Main Menu select Networking Administration > TCP/IP Administration.

Make a note of the IP Address, Subnet Mask and default Gateway IP Address. The
information will be required later in the setup.
Page 64
15-601063 Issue 15b (31 May 2006)
Voicemail Pro Installation and Maintenance Guide
IP Office