Avaya IP Office Voicemail Pro Installation And Maintenance Manual page 61

21. When the Service Account Name window is displayed. Details of the default administrator
account might already be filled in.
22. In the Service Account Name window, type the User Name and Password for the user account
under which the Voicemail Pro service should log on and run. This should be the IMS account
created previously on the domain and Exchange server. Alternatively click Browse and select
from the list of available PC or network accounts.
23. Click Next >.
The Select Program Folder window is displayed.
24. By default the program folders are created in a folder called IP Office. You can specify a different
folder or select one from the list of existing folders. To specify a different folder, type the folder
name in the Program Folders box. Alternatively to use an existing folder, highlight a name in the
list of existing folders.
25. Click Next >.
The Start Copying Files window is displayed. Before any copying starts, you are presented with a
summary of the settings that you have chosen so far.
26. Review the settings to make sure that they are what you expect. In particular, check that the
required languages are listed. Scroll down if necessary.
If for any reason the details are not what you expect, click < Back and make the necessary
changes.
When you are satisfied that the details are correct, click Next > to start copying the files.
The Setup Status window is displayed to keep you informed while the installation takes place.
27. When the installation is complete you are prompted to restart your computer. Choose Yes I want
to restart my computer now.
28. Click Finish to restart now.
29. When the server PC has restarted, the IP Office Voicemail Pro - Email Settings window is
displayed so that you can specify the name of the email account to use for outgoing SMTP e-
mails from the Voicemail Pro server.
30. In the Account Details box, type the name of the e-mail account to use. Alternatively click
Browse and select an account to use.
31. Click Next >.
IP Office Voicemail Pro - SMTP Email Settings window is displayed so that you can specify
details of the SMTP server to which the Voicemail Pro server should send messages. A proposed
server name might already be filled in.
32. In the Mail Server box, leave the proposed name unchanged or type the name of the server to
use. This should be the fully qualified domain name.
33. In the Port Number box, type the number of the receiving port on the SMTP mail server. The
default is 25.
34. To enforce server authentication, check the Server Requires Authentication box. This is
optional. If you check it you also need to provide the Account Name and Password that need to
be entered. You can also choose whether or not to set the Use Challenge Response
Authentication option.
35. Click Finish.
An attempt is made to validate the e-mail settings. An error message is displayed when the
attempt to connect with an SMTP server fails.
36. Click OK to acknowledge the message.
You have now finished installing the Voicemail Pro Server and VPNM software. The next step is
to configure the VPNM accounts. For more information, see Configuring VPNM Accounts on
Voicemail Pro.
Voicemail Pro Installation and Maintenance Guide
IP Office
Installing Networked Messaging (VPNM)
15-601063 Issue 15b (31 May 2006)
Page 61