The F result was added to the
Configuring an Analog Extension Number for Fax Use
If the PC that is being used as the fax server uses an analog fax card, it must be connected to an IP
Office analog extension (POT) port. You are then ready to configure the analog extension for fax use.
Note
This task is completed in IP Office Manager. For more information, see the IP Office Manager
help or guide.
To configure an analog extension number for fax use:
1. In IP Office Manager, display the Extension details for the extension that you are using for the
fax.
2. From the Caller Display Type list, select DTMFF.
Voicemail Pro Installation and Maintenance Guide
IP Office
Menu action Touch Tones tab using the
Configuring Fax Servers
icon.
15-601063 Issue 15b (31 May 2006)
Page 199