Avaya IP Office Voicemail Pro Installation And Maintenance Manual page 87

16. Click Next >.
If you have chosen to install the Voicemail Pro Campaign Web Component, the Select the Web
Server root directory window is displayed.
17. Type the path to the folder where you would like to save the web campaign web pages.
Alternatively use the default location or click Browse and select a folder to use.
18. Click Next >.
The Select the Destination of the Script directory of Your Web window is displayed.
19. Type the path to the folder where the web campaign components are to be installed. Alternatively
use the default location or click Browse and select a folder to use.
20. Click Next >.
The Service Account Name window is displayed. Details of the default administrator account are
already filled in.
21. In the Service Account Name window, type the User Name and Password for the user account
under which the Voicemail Pro service should log on and run. This should be the IMS account
created previously on the domain and Exchange server. Alternatively click Browse and select
from the list of available PC or network accounts.
22. Click Next >.
The Select Program Folder window is displayed.
23. By default the program folders are created in a folder called IP Office. You can specify a different
folder or select one from the list of existing folders. To specify a different folder, type the folder
name in the Program Folders box. Alternatively to use an existing folder, highlight a name in the
list of existing folders.
24. Click Next >.
The Start Copying Files window is displayed. Before any copying starts, you are presented with a
summary of the settings that you have chosen so far.
25. Review the settings to make sure that they are what you expect. In particular, check that the
required languages are listed. Scroll down if necessary.
26. If for any reason the details are not what you expect, click < Back and make the necessary
changes.
When you are satisfied that the details are correct, click Next > to start copying the files.
The Setup Status window is displayed to keep you informed while the installation takes place.
27. When the installation is complete, click Finish to restart now.
28. An attempt is made to start all services associated with Voicemail Pro and IMS.
Important

This step fails if the licenses are not valid on the IP Office.
29. After the services have started, the installation process continues. The IP Office Voicemail Pro -
System Settings window is displayed.
30. Select the required logging levels. Logging may be useful for fault diagnostics. You can switch
logging off after you have verified that IMS is working correctly.
31. Click Next >.
The IP Office Voicemail Pro - Path Settings window is displayed.
32. Enter the name of the server PC on which Voicemail Pro and IMS have been installed. In most
cases the name is detected automatically and filled in for you. If not, click Browse and provide
the name of the Integrated Message Voice Server.
Voicemail Pro Installation and Maintenance Guide
IP Office
Installing the Integrated Messaging Service
15-601063 Issue 15b (31 May 2006)
Page 87