Table of Contents
Advertisement
3.3 CLI Mode Management
To configure the system, connect a USB cable to a USB port on a PC or notebook computer and to the micro USB connector
(console) of the Industrial Managed PoE+ Switch.
The box of the Industrial Managed PoE+ Switch does not contain any USB cable.
A terminal program is required to make the software connected to the Industrial Managed PoE+ Switch.
1.
Run terminal program on the OS, such as Putty or TeraTerm.
2.
When the following screen appears, make sure that the COM port should be configured as:
♦ Baud: 115200
♦ Parity: None
♦ Data Bits: 8
♦ Stop Bits: 1
♦ Flow Control: None
Figure 3-1: Industrial Managed PoE+ Switch USB Console Connectivity
User's Manual of IGS-10020HPT-U
42
Advertisement
Table of Contents
