Dot1X System-Auth-Control - Planet SGSD-1022 User Manual

dot1x timeout tx-period
dot1x intrusion-action
show dot1x

dot1x system-auth-control

This command enables 802.1X port authentication globally on the switch. Use the
no form to restore the default.
Syntax
[no] dotx system-auth-control
Default Setting
Disabled
Command Mode
Global Configuration
Example
Console(config)#dot1x system-auth-control
Console(config)#
dot1x default
This command sets all configurable dot1x global and port settings to their default values.
Command Mode
Global Configuration
Example
Console(config)#dot1x default
Console(config)#
dot1x max-req
This command sets the maximum number of times the switch port will retransmit an EAP request/identity packet to the client
before it times out the authentication session. Use the no form to restore the default.
Syntax
dot1x max-req count
no dot1x max-req
Sets the time period during an authentication session that the
switch waits before re-transmitting an EAP packet
Sets the port response to intrusion when authentication fails
Shows all dot1x related information
Table 5-38 802.1X Port Authentication Commands
460
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
IC
IC
PE