Dot1X Re-Authentication - Planet WGSD-1022 User Manual

force-authorized — Disable 802.1X authentication on the interface and cause the port to transition to the authorized
state without any authentication exchange required. The port resends and receives normal traffic without 802.1X-based
authentication of the client.
force-unauthorized — Deny all access through this interface by forcing the port to transition to the unauthorized state,
ignoring all attempts by the client to authenticate. The switch cannot provide authentication services to the client through
the interface.
Default Configuration
force-authorized
Command Mode
Interface configuration (Ethernet)
User Guidelines
There are no user guidelines for this command.
Examples
The following example enables 802.1X authentication on the interface.
Console (config)# interface ethernet e8
Console (config-if)# dot1x port-control auto

5.29.4 dot1x re-authentication

The dot1x re-authentication interface configuration command enables periodic re-authentication of the client. Use the no form
of this command to return to the default setting.
Syntax
dot1x re-authentication
no dot1x re-authentication
This command has no arguments or keywords.
Default Configuration
Periodic re-authentication is disabled.
Command Mode
Interface configuration (Ethernet)
User Guidelines
There are no user guidelines for this command.
User's Manual of WGSD-1022/WGSD-8000
- 365 –