Qos Port Classification - Planet WGS-5225-8P2SV User Manual

4.4.1.1 QoS Port Classification

This page allows you to configure the basic QoS Classification settings for all switch ports. The Port classification screen in
Figure 4-4-1 appears.
The page includes the following fields:
Object

Port

CoS
 DPL
Figure 4-4-1: QoS Ingress Port Policers Page Screenshot
Description
The port number for which the configuration below applies.
Controls the default CoS
All frames are classified to a CoS. There is a one to one mapping between CoS,
queue and priority. A CoS of 0 (zero) has the lowest priority.If the port is VLAN
aware, the frame is tagged and Tag Class. is enabled, then the frame is
classified to a CoS that is mapped from the PCP and DEI value in the tag.
Otherwise the frame is classified to the default CoS.
The classified CoS can be overruled by a QCL entry.
Note: If the default CoS has been dynamically changed, then the actual default
CoS is shown in parentheses after the configured default CoS.
Controls the default DPL
All frames are classified to a Drop Precedence Level.
If the port is VLAN aware, the frame is tagged and Tag Class. is enabled, then
the frame is classified to a DPL that is mapped from the PCP and DEI value in
280
User's Manual of WGS-5225-8P2S Series
value.
value.