Qos Port Classification - Planet IGS-10020HPT-U User Manual

4.4.1.1 QoS Port Classification

This page allows you to configure the basic QoS Classification settings for all switch ports. The Port classification screen in
Figure 4-4-1-1 appears.
The page includes the following fields:
Object
•
Port
•
CoS
• DPL
• PCP
Figure 4-4-1-1: QoS Ingress Port Policers Page Screenshot
Description
The port number for which the configuration below applies.
Controls the default CoS
All frames are classified to a CoS. There is a one to one
mapping between CoS, queue and priority. A CoS of 0 (zero)
has the lowest priority.
The classified CoS can be overruled by a QCL entry.
Note: If the default CoS has been dynamically changed, then
the actual default CoS is shown in parentheses after the
configured default CoS.
Controls the default DPL
All frames are classified to a Drop Precedence Level.
The classified DPL can be overruled by a QCL entry.
Controls the default PCP
All frames are classified to a PCP value.
If the port is VLAN aware and the frame is tagged, then the
User's Manual of IGS-10020HPT-U
value.
value.
value.
247