Command Structure; Connect To Pc's Rs-232 Serial Port; Using The Cli; Cli Command Modes - Planet WGSD-1022 User Manual

The WGSD-Switch is a managed Ethernet Switch that can be controlled by the RS-232 console interface, telnet interface, and
Web interface. This chapter describer how to configure the Switch through these interfaces.
When you are ready to configure the smart functions of the Switch, make sure you had connected the supplied RS-232 serial
cable to the RS-232 port at the front panel of your WGSW-24010 Switch and your PC.

5.1 Connect to PC's RS-232 serial port

Hyper Terminal
In Windows 98/2000/XP, launch "HyperTerminal", create a new connection, and adjust settings as below:
Baud per second: 38400
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None

5.2 Using the CLI

5.2.1 CLI Command Modes

User's Manual of WGSD-1022/WGSD-8000

5. COMMAND STRUCTURE

- 153 –