Show Dhcp L2Relay Circuit-Id Vlan - Dell Networking 7048 Reference Manual

show dhcp l2relay circuit-id vlan

Use the show dhcp l2relay circuit-id vlan command in Privileged EXEC
mode to display whether DHCP L2 Relay is globally enabled and whether the
DHCP Circuit-ID option is enabled on the specified VLAN or VLAN range.
Syntax
show dhcp l2relay circuit-id vlan
Parameter Description
Parameter
vlan-range
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show dhcp l2relay circuit-id vlan 300
DHCP L2 Relay is Enabled.
DHCP Circuit-Id option is enabled on the following VLANs:
300
356
DHCP Layer 2 Relay Commands
vlan-range
Description
Show information for the specified VLAN range. A range may
be a single VLAN ID or two VLAN IDs separated by a single
dash with no embedded spaces.