Renew Dhcp - Dell Networking 7048 Reference Manual

Powerconnect 7000 series systems

Hide thumbs Also See for Networking 7048:

console#release dhcp vlan2

renew dhcp

Use the renew dhcp command in Privileged EXEC mode to force the DHCP

client to immediately renew an IPv4 address lease.

interface-id

renew dhcp {

Parameter Description

interface-id

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC

User Guidelines

If the interface has a leased IPv4 address when this command is issued, the

DHCP client sends a DHCP REQUEST message telling the DHCP server

that it wants to continue using the IP address. If DHCP is enabled on the

interface, but the interface does not currently have an IPv4 address (for

example, if the address was previously released), then the DHCP client sends

a DISCOVER to acquire a new address. If DHCP is not enabled on the

interface, then the command fails and displays the following error message:

DHCP is not enabled on this interface

| out-of-band}

Any valid routing interface. See

for interface representation.

Keyword to identify the out-of-band interface. The DHCP

client renews the leased address on this interface.

DHCP Management Interface Commands

Interface Naming Conventions

Show Quick Links