Dell Networking 7048 Reference Manual page 703

Syntax
show class-map [
classname — Specifies the valid name of an existing DiffServ class.
•
(Range: 1–31 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays all the configuration information for the class
named "Dell".
console#show class-map
Class Name
------------------------------- ----- ----- -----------------------------
ipv4
ipv6
stop_http_class
match_icmp6
console#show class-map ipv4
Class Name..................................... ipv4
Class Type..................................... All
Class Layer3 Protocol.......................... ipv4
Match Criteria
---------------------------- -------------------------------------
Source IP Address
console#show class-map stop_http_class
classname
]
Class L3
Type
All
All
All
All
2.2.2.2 (255.255.255.0)
Proto Reference Class Name
ipv4
ipv6
ipv6
ipv6
Values
QoS Commands
703