Msgauth; Name (Radius Server) - Dell Networking 7048 Reference Manual

msgauth

Use the msgauth command to enable the message authenticator attribute to
be used for the RADIUS Authenticating server being configured. Use the
"no" form of this command to disable the message authenticator attribute.
Syntax
msgauth
no msgauth
Default Configuration
The message authenticator attribute is enabled by default.
Command Mode
Radius mode
User Guidelines
There are no user guidelines for this command.
Example
console(Config-auth-radius)#msgauth

name (RADIUS server)

Use the name command to assign a name to a RADIUS server. Use the no
form of the command to return the name to the default (unspecified). The
no form of the command does not require the user to enter the configured
name.
Syntax
name servername
no name
732
RADIUS Commands