Ipv6 Routing Commands; Ipv6 Limitations & Restrictions; Commands In This Chapter - Dell Networking 7048 Reference Manual

IPv6 Routing Commands

The IPv6 version of the routing table manager provides a repository for IPv6
routes learned by dynamic routing protocols or static configuration. RTO6
manages dynamic and static IPv6 routes, redistributes routes to registered
protocols, supports ECMP routes, and supports multiple routes to the same
destination, sorted by preference. IPv6 routing only operates over VLAN
interfaces.
IPv6 Limitations & Restrictions
The following limitations apply:
• IPSec support is not available.
• The DHCPv6 server does not support stateful address configuration.
• Automated router renumbering is not supported.

Commands in this Chapter

This chapter explains the following commands:
clear ipv6 neighbors ipv6 mld query-
clear ipv6 statistics ipv6 mld router
ipv6 address
ipv6 enable
ipv6 hop-limit
ipv6 host
max-response-time
ipv6 mtu
ipv6 nd dad
attempts
ipv6 nd managed-
config-flag
ipv6 nd ns-interval show ipv6 brief
ipv6 route
ipv6 route distance show ipv6 mld-proxy
ipv6 unicast-
routing
ping ipv6
ping ipv6 interface show ipv6 route
IPv6 Routing Commands
50
show ipv6 mld-proxy
groups detail
interface
show ipv6 mld traffic
show ipv6 neighbors
show ipv6 route
preferences
1057