Show Mac Address-Table Static - Dell Networking 7048 Reference Manual

Example
In this example, all classes of entries in the bridge-forwarding database for
gigabit Ethernet interface 1/0/1 are displayed.
console#show mac address-table interface
gigabitethernet 1/0/1
Aging time is 300 Sec
Vlan Mac Address
---- -------------- ----
1 0000.0001.0000 Dynamic gi1/0/1
1 0000.8420.5010 Dynamic gi1/0/1
1 0000.E26D.2C2A Dynamic gi1/0/1
1 0000.E89A.596E Dynamic gi1/0/1
1 0001.02F1.0B33 Dynamic gi1/0/1

show mac address-table static

Use the show mac address-table static command in User EXEC or Privileged
EXEC mode to display static entries in the bridge-forwarding database.
Syntax
show mac address-table static [address
vlan-id
[vlan ]
Parameter Description
Parameter
mac-address
interface-id
vlan-id
Type
Description
A MAC address with the format xxxx.xxxx.xxxx.
Specify an interface type; valid interfaces include physical ports
and port channels.
Specify a valid VLAN; the range is 1 to 4093.
Port
-------------
mac-address
] [interface
Address Table Commands
interface-id
]
321